---
title: "zudo-block-60 Open Assembly Guide | Takazudo Modular"
url: "https://takazudomodular.com/en/guides/how-to-build-zudo-block-60-open/"
language: en
description: "Detailed assembly instructions for zudo-block-60 Open with video guide. Assembly guide for the 60HP enclosure-free frame kit."
alternate_ja: "https://takazudomodular.com/guides/how-to-build-zudo-block-60-open/"
date_published: "2025-08-12"
date_modified: "2025-08-12"
source: "Takazudo Modular"
---

![zudo-block-60 Open Assembly Guide](https://imgs.takazudomodular.com/images/p/zb60-open-high-view-b__og/revisions/production/r1-b3a62d2a5f02855114e93625b15d337e993185a701dfaf6c701c77a1a479f1ac/1200w.webp)

# Guide: zudo-block-60 Open Assembly Guide

Author: Takazudo | Published: 2025/08/12

- [# Build Guide](https://takazudomodular.com/en/tags/how-to-build/)
- [# Takazudo Modular](https://takazudomodular.com/en/tags/takazudo/)
- [# Case](https://takazudomodular.com/en/tags/case/)

[Build Guides](https://takazudomodular.com/en/guides/series/how-to-build/) 6 episodes [Previous episode: zudo-block-40 / zudo-block-60 Assembly Guide](https://takazudomodular.com/en/guides/how-to-build-zudo-block/) [Next episode: zudo-block-40x2 / zudo-block-60x2 Assembly Guide](https://takazudomodular.com/en/guides/how-to-build-zudo-block-x2/)

This guide explains how to assemble the zudo-block-60 Open with accompanying video instructions. This frame kit is a minimalist 60HP Eurorack frame that allows you to mount modules with a bare-minimum configuration.

For product details, please refer to the [zudo-block-60 Open Product Details](https://takazudomodular.com/en/products/zb60-open-intro/) page.

## Required Tools

The following tools are needed for assembly. Please have them ready beforehand.

- Hex wrench (e.g., [Amazon: Hex Wrench 9-Piece Set](https://amzn.to/3Gf5O6y))
- Wrench (e.g., [Amazon: Mini Wrench Set](https://amzn.to/3WtPYdC))
- Pliers (e.g., [Amazon: Pliers Set](https://amzn.to/3RoXJyy))
- Phillips screwdriver (e.g., [Amazon: Screwdriver Set](https://amzn.to/3Y3kdsO))

## Assembly Video (Full Overview)

If you'd like to see the overall assembly flow on video, please watch this first.

[YouTube video](https://www.youtube.com/watch?v=H11yKa74uso)

## Step 1: Rail Frame Assembly

First, connect two 30HP rails together to create two 60HP rails. These are secured using 50mm M5 set screws (headless screws).

### 1-1. Inserting the Set Screws

The underside of each rail has a hole that accepts M5 screws. Start by inserting the set screw about 2cm deep using a hex wrench.

[YouTube video](https://www.youtube.com/watch?v=uwsLG8KvwfM)

### 1-2. Connecting the Rails

Once done, thread the other 30HP rail onto the set screw by hand, then hold it with pliers at the end and tighten until the gap is closed.

[YouTube video](https://www.youtube.com/watch?v=4384WjSWoXw)

![Photo of rail connection](https://imgs.takazudomodular.com/images/p/lite-rail-connect-1/revisions/production/r1-3263b667ce1f550b858e678099fb6aae76d4f25e9ccdbd13abf46d9758d5ba4f/2000w.webp)

![Photo of rail connection](https://imgs.takazudomodular.com/images/p/lite-rail-connect-2/revisions/production/r1-b3f2336d74f3d89770f1c980e740e67860228b061a5138608a81e92a8c6efbae/2000w.webp)

![Photo of rail connection](https://imgs.takazudomodular.com/images/p/lite-rail-connect-3/revisions/production/r1-acb50c08c31e622bbc790d979169f5bb341f5aa589b2edaa53e3ba9790e1f083/2000w.webp)

## Step 2: Attaching the Rail Mounting Aluminum Panels

Once the 60HP rails are complete, attach the rail mounting aluminum panels to the left and right sides of the rails.

### 2-1. Panel Placement

Position the panels so that the one with large rectangular holes faces inward and the one with many holes faces outward, then secure with 40mm M5 screws.

**Note: The rails have a lip/edge. Make sure the lip faces outward.**

![Side panel placement](https://imgs.takazudomodular.com/images/p/zb60-open-assembly-1/revisions/production/r1-4a6bc26e936964a267374a08cf659f5ab757cd0b948476a44f6a71eeb1cdd77a/2000w.webp)

### 2-2. Securing the Panels

Here is a video showing how to attach the mounting aluminum panels to the rails.

[YouTube video](https://www.youtube.com/watch?v=vRbiFD3TMQk)

### 2-3. Rail Adjustment

After attachment, insert a module or blank panel to check and adjust the rail tilt and the height between rails. The screw holes in the rail mounting aluminum panels have a small amount of play, allowing fine adjustment of the rail spacing.

[YouTube video](https://www.youtube.com/watch?v=IPpqxjJMjJ4)

## Step 3: Side Panel Attachment

At this point, you should have aluminum panels attached to both sides of the rails. Attach the left and right side panels to this frame to complete the build.

### 3-1. Preparing Screws and Washers

Use M5 14mm screws to secure the side panels to the rail frame. From the inside, pass the components in this order:

1. Screw head
2. Rail mounting panel
3. 3mm-tall washer
4. Side panel
5. 1mm-tall washer
6. Nut

Do this at two positions of your choice. Think of it as placing the 3mm-tall washer in the space between the frame and the side panel.

![Assembly diagram](https://imgs.takazudomodular.com/images/p/zb60-open-assembly-2/revisions/production/r1-fff2afb9011b927984090b009f643d31799a86e457528f421b0016b435a19a4a/2000w.webp)

### 3-2. Final Adjustment and Securing

Do this on both left and right sides to create a state where the frame and side panels are secured together.

Place the assembly on a flat surface such as the floor, fine-tune the positions so the screws on both sides are at matching heights, then hold the nuts with a wrench and tighten the screws firmly. At this point, make sure the bottom edges of the side panels sit flat on the surface so the frame doesn't wobble.

[YouTube video](https://www.youtube.com/watch?v=4X9jIQpVEdo)

That concludes the assembly guide for the zudo-block-60 Open.

For details on the zudo-block-60 Open, please refer to the following page:

[Takazudo Modular: zudo-block-60 Open An introduction to the Takazudo Modular zudo-block-60 Open. The zudo-block-60 Open is a 60HP Eurorack frame with minimal construction for module mounting. Using 3D-printed rails, it has no built-in power supply or enclosure but is very affordable. Side panels and aluminum plate frames assemble easily with screws. Convenient for getting started with modular synths or testing DIY modules.](https://takazudomodular.com/en/products/zb60-open-intro/)

Series

[← Previouszudo-block-40 / zudo-block-60 Assembly Guide](https://takazudomodular.com/en/guides/how-to-build-zudo-block/) [Next →zudo-block-40x2 / zudo-block-60x2 Assembly Guide](https://takazudomodular.com/en/guides/how-to-build-zudo-block-x2/)

## [Build Guides](https://takazudomodular.com/en/guides/series/how-to-build/)

6 episodes

1. [zudo-block-40 / zudo-block-60 Assembly Guide 2025/08/12](https://takazudomodular.com/en/guides/how-to-build-zudo-block/)
2. zudo-block-60 Open Assembly Guide Current 2025/08/12
3. [zudo-block-40x2 / zudo-block-60x2 Assembly Guide 2025/11/28](https://takazudomodular.com/en/guides/how-to-build-zudo-block-x2/)
4. [zudo-rail Assembly Guide 2025/08/12](https://takazudomodular.com/en/guides/how-to-build-zudo-rail/)
5. **Show 2 later**

   1. [10BOX JuBako Assembly Guide 2025/12/08](https://takazudomodular.com/en/guides/how-to-build-10box/)
   2. [zudo-block 7U Assembly Guide 2026/07/27](https://takazudomodular.com/en/guides/how-to-build-zudo-block-7u/)
